Manifold Gasket MITSUBISHI Series

Intake manifold gasket now is a modern sealing system. That is, have to deal with more aggressive media, higher temperatures, lower component strength and higher deformation under mechanical stress. WEIANN / MATTO makes high quality rubber to this part and be used in the intake area.

Exhaust manifold gasket is required hard material beads where the gas passes through at very high temperatures and low pressure. These gasket beads are always reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature. Modern exhaust manifold gaskets are made of uncoated, beaded multilayer steel (MLS) or composited metal/non-asbestos sheet. The number of sheet layers depends on the distortion of the exhaust manifold and cylinder head components. Leaks in the exhaust manifold produce bad exhaust values, a loss of power and increased fuel consumption.

MITSUBISHI Manifold GasketEngine Name : 2G23 2G24 2G25 3G82 4A30 G11B G12B/G12J G13B/4G13 G15B G15B NEW G32B G37B/4G37 G52B G54B/F&W 4G13 4G15B 4G18 4G1E 4G30/4G33 4G31 4G32 4G32B 4G32/4G35 4G33 4G33/4G36 4G37/G37B 4G41 4G52B 4G61 4G63 4G64 G62B G63B G63BT 4G63B 4G63BK 4G63FRK 4G63C 4G63K NEW 4G64B 4G64K/G64K 4G64BK 4G69 4G82 4G92 4G93 6G72 6G72-D 6G73 6G74 6A12 6A13 4D30 4D31 4D31T 4D32 4D33 4D34 4D34T 4D35 4D56 4D36/4D37 4D55/4D55T 4D56S/4D56T 4D65 4D65T 4D68 4D68T 4M40 4M40T 4M41 4M51 4DQ5 4DQ7 4DR5 4DR51 4DR7 6M60 6M61 6M70 6D10 6D14 6D14A 6D14T/6D142A 6D15 6D15T/6D15-3T/6D15C-T 6D15-2AT 6D15-3T 6D16 6D16-2AT 6D16A 6D16-T 6D16-2T 6D17T 6D20 6D22 6D22T 6D22T/6D24 6D31 6D31T 6D34T 6D40 6DB 6DC1/6DC2 6DC2 6DR5 6DS7/6DS3/6DS5 8DC2 8DC6/8DC4 8DC8 8DC81 8DC9/8DC90-T 8DC91A/8DC91 8DC11/8DC101/8DC111A 10DC6 10DC80A 10DC9 10DC11 K3D K3E K3F K4E K4F K4M K4N S2E S2E2 S3E S4E S4E2 S6E S6E2 S3F S4K S6A S6A2 S6A3 S6B S6B3 S6N S6K S6KT S6R/ S6R2 S6R2 S4S S6S T120SS T120SS/4G17 and more. 

Manifold Gasket MITSUBISHI 4D30

Manifold Gasket MITSUBISHI 4D30,ME999662,ME999856/ME013330 and more.