Manifold Gasket KIA Series

Intake manifold gasket now is a modern sealing system. That is, have to deal with more aggressive media, higher temperatures, lower component strength and higher deformation under mechanical stress. WEIANN / MATTO makes high quality rubber to this part and be used in the intake area.

Exhaust manifold gasket is required hard material beads where the gas passes through at very high temperatures and low pressure. These gasket beads are always reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature. Modern exhaust manifold gaskets are made of uncoated, beaded multilayer steel (MLS) or composited metal/non-asbestos sheet. The number of sheet layers depends on the distortion of the exhaust manifold and cylinder head components. Leaks in the exhaust manifold produce bad exhaust values, a loss of power and increased fuel consumption.

KIA Manifold Gasket Engine Name : CD B3 (PRIDE 1.3) B6 B6-D B6-ZE FE EF750 HO7D/ K6700 J2 2700 J2 3000 K2400 K2700 K3500 KV6 KRV6 R2 RF T8 TED VN and more.


Manifold Gasket KIA 1

Manifold Gasket KIA 1/OK247-10-271C and more.