Manifold Gasket HINO Series
Intake manifold gasket now is a modern sealing system. That is, have to deal with more aggressive media, higher temperatures, lower component strength and higher deformation under mechanical stress. WEIANN / MATTO makes high quality rubber to this part and be used in the intake area.
Exhaust manifold gasket is required hard material beads where the gas passes through at very high temperatures and low pressure. These gasket beads are always reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature. Modern exhaust manifold gaskets are made of uncoated, beaded multilayer steel (MLS) or composited metal/non-asbestos sheet. The number of sheet layers depends on the distortion of the exhaust manifold and cylinder head components. Leaks in the exhaust manifold produce bad exhaust values, a loss of power and increased fuel consumption.
HINO Manifold Gasket Engine Name : DK10 DM100/DQ100 DS50/DS60 DS50/DS60 DS70 EB100 EB100 EB300 EB400 EC100 ED100 EF100 EF300 EF500/EF700 EF50/EF750 EH100 EH300 EH500/EH800 EH700 EK100 EL100 EM100 EP100 ER200 F17C F20C(NEW) F20C(OLD) F21C HO6C/H07C HO6C-TB HO6CT HO7C HO7D J05C JO5CT J07C J08C/JO8C-T/JO8C-TG J08C K13C/EK200 K13D K13CⅡ K13C 24V(OLD) K13C 24V(NEW) M10C P11C V22C V25C V26C WO4D WO4E WO4E/PS130 WO6D K13C JO5E and more.